Carbon Fiber Infused – HyperX QuadCast Microphone Mount Adapter Mic Arm Adapter QuadCast Accessories Parts Boom Arm Adapter (3D Printed)

This is a replacement for the mic stand adapter for the HyperX Quadcast or Quadcast S.

This is a 3D-printed product.

!!WARNING!!
This utilizes the screw and thread that comes with the microphone! If you use any other hardware you may cause additional stress to the adapter and BREAK IT! If used with the washers and the original hardware it will hold tight without extra stress.
ALSO, it is important to know that the holes on both sides are NOT equally as big. Like the standard adapter that comes with the microphone, they are specific to the hardware that is supposed to be used with the unit! If you try to use the circle adapter on the hexagon side it will NOT work. If you try to use the hexagon hardware on the circle side, then it will NOT work. You will damage the unit if you try to make it work. If you have to drill ANYTHING then your hardware is NOT made for this adapter.

This by default comes with a 3/8-16 thread (standard). If you need a different thread you must reach out and additional processing time may be necessary. I actively carry 1/4-20 threads as well.

The threads are thermally tapped, the use of heat melts the thread into the adapter making it one.

Colors: Black
Material: PLA
Thread: 3/8″-16 (if you need 1/4-20 please reach out)

This also includes 2 washers that are 3D printed to replace the washers that come with your unit as they are easy to lose!